Presonus Central Station PLUS User Manual download pdf (Page 7)

Owner’s Manual

Getting StartedOverviewCalibrationHookupControls

and Connections

Technical Information Getting Started

Connecting the CSR-1 to your Central Station 1.3

Getting Started 1

1.3 Connecting the CSR-1 to your Central Station

1. Connect one side of the included DB15 cable to the back of the CSR-1

and the other side to the Console connection on the back of your Central

Station. Please note that the DB15 cable has a proprietary pin-out; it

looks like a standard VGA cable but is wired diﬀerently. If you require a

replacement cable, you will need to order it from www.PreSonus.com.

2. Press the Activate button on the back of your Central Station. When the

CSR-1 is properly communcating with your Central Station, the Active light

to the left of the Main Volume control on the CSR-1 will illuminate blue.

Once the CSR-1 is connected and activated, it will disable the

Main Volume control on the front panel of your Central Station;

use the Main Volume control on your CSR-1 instead.

All buttons on the CSR-1 correspond directly to, and

control, their counterparts on the Central Station.

1.4 Connecting Monitor Speakers

1. Turn oﬀ all powered monitors and power amps before connecting cables.

2. Connect your powered control-room monitors (or

power amp) to Speaker Output A.

3. [Optional] Connect your secondary control-room

monitors (or power amp) to Speaker Output B.

4. [Optional] Connect your subwoofer or tertiary control-room monitors

(or power amp) to Speaker Output C. Because Speaker Output C can be

enabled concurrently with either Speaker Output A or Speaker Output B, we

recommend that you connect this output to your subwoofer for 2.1 mixing.

5. Turn the following controls completely counterclockwise: Talkback Mic Level,

Headphone Level, Output Level, Aux In Level, and Main Output Level.

6. Using a ﬂat-head screwdriver, turn the speaker trims for all

passive speaker outputs completely counter-clockwise.

7. Power on your main input source (such as an audio interface or mixer).

8. Turn the volume of your main input source all the way down.

9. Power up your Central Station by connecting the power supply

to the rear of the unit and to an AC outlet or power strip.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

No comments

Presonus Central Station PLUS User Manual Page 7