Presonus FIREstation User Manual download pdf (Page 26)

4.21 ADAT

ADAT mode would slave the FIREstation(s) to an external device that

utilized an ADAT optical output. The unit would automatically sync

itself to the sampling rate of the external device. The ADAT mode

would most likely be used when a BNC output is not present on the

external device.

4.22 INT

Three different sample rates are available. These rates are 32k, 44.1k,

and 48k. The higher the resolution, the more hard drive space

required. For example, one minute of stereo recording at 44.1kHz

requires 10 MB of hard drive space per minute.

NOTE: The FIREstation always records at a 24-bit resolution. In order

to record at a lower resolution, the software has to be set to dither or

truncate the incoming recording signal.

4.23 Buttonology Notes

If the EXT clock button blinks, then no clock is present for the

FIREstation to be slaved to the external device.

If the LED for Sample rate/external device blinks, then signal is out of

the sampling range.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 38 39

ChrisBic 26 Apr 2024 | 12:41:54

Hello, im noob :)

Presonus FIREstation User Manual Page 26