Presonus FIREstation User Manual download pdf (Page 32)

6.1 TOP PANEL

6.2 Analog To Digital Converter Line Level Adjust

1 2 3 4 5 6 7 8

Analog to Digital Converter

Line Level Adjust

There is typically a 14dB difference between the 0dB reference levels

in analog and digital equipment. The line level adjust on the

FIREstation allows the user to adjust the 0dB reference to match that

of an external analog device such as a preamp or console. A tweaker

or small Phillips screwdriver can be used to adjust this level. Turn the

tweaker clockwise to raise the 0dB level and counter-clockwise to

lower the level.

For example: If you were running a Presonus M80 into your

FIREstation, you may notice that you could go into the red on the

M80’s meters while the recording software would maintain a relatively

low recording level. You could adjust the FIREstation converters so

that the software would have the same meter reading as the M80.

6.3 Heat Vent

The FIREstation has three heat vents. The vent on the top of the unit

is directly over the power transformer. It is strongly recommended

that there be at least one rack space open above the unit for proper

cooling. Anything placed directly on top of any of the three vents could

cause the unit to overheat and malfunction.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39

ChrisBic 26 Apr 2024 | 12:41:54

Hello, im noob :)

Presonus FIREstation User Manual Page 32