Presonus FIREstation User Manual download pdf (Page 35)

The S/PDIF Inputs Cannot Be Routed to Other Channels on the Line

Mixer

By default, the S/PDIF I/O is ALWAYS assigned to channels seven and

eight. This cannot be changed.

8.5 The Preamps Noise Floor Is Higher When The Tube Drive Is

Engaged

Engaging the tube drive could increase the amount of noise in the

source signal. Turning up the tube drive and the gain simultaneously

could also increase the noise floor. However, mixing the amount of

tube drive and preamp gain can create interesting effects and sounds.

8.6 mLAN Returns Three And Four Do Not Work In ADAT Mode

mLAN returns three and four are not useable when in ADAT or in stand

alone mode. All return channels must be routed to channels one and

two in order to be monitored.

8.7 Word Clock Synchronization (Sync)

If you experience pops, clicks or distortion while recording it may be

due to incorrect Word Clock sync. Only one device can be the master

and all the rest must be slaved. For most applications, the computer

will be the master. In this instance, the FIREstation will be set to EXT

and mLAN. If the ADAT output of the FIREstation is connected to

another device such as a digital mixer, it is recommended that the

BNC output be connected to the BNC input of the receiving device (in

this case the external digital mixer).

1 2 ... 30 31 32 33 34 35 36 37 38 39

ChrisBic 26 Apr 2024 | 12:41:54

Hello, im noob :)

Presonus FIREstation User Manual Page 35