Presonus AudioBox 44VSL User Manual download pdf (Page 22)

PreSonus AudioBox

™

22/44VSL

Overview Hookup Connecting

to a

Computer

Software: Virtual StudioLive

SL Remote,

and Studio One Artist

Tutorials Technical

Information

Troubleshooting

and Warranty

4 Software: Virtual StudioLive and Studio One Artist

Software: Virtual StudioLive

and Studio One Artist

4.1 Virtual Studio Live

Meter Peak Hold Sets the Clip Indicator to Remain Illuminated

When this option is enabled, the clip indicator on any given channel

meter in VSL will remain illuminated until manually cleared, even if the

signal is no longer clipping. To clear the clip indicator, click on it with your

mouse.

Meter Post Fader Sets the Channel Metering to Post Fader Signal

When this option is enabled, the channel meters in VSL will display the

signal level after it has been boosted or attenuated by the channel fader.

By default, all metering in VSL is pre-fader.

Run at Startup (Windows Only) Launches the Virtual StudioLive Application Automatically on Startup.

When this is enabled, VSL will automatically launch each time you boot

your Windows.

On the Mac, you can set this up ﬁrst by dragging VSL to your dock,

then by right-clicking it and selecting Options>Open at Login.

Please Note: VSL is disabled when it is not launched and all audio routing

must be made either in your DAW or in your system preferences.

Sample Rate Selector (OS X Only) Changes Sample Rate.

Sets the sample rate to 44.1, 48, 88.2, or 96 kHz.

A higher sample rate will increase the ﬁdelity of the

recording. It will also increase the ﬁle size and the amount

of system resources necessary to process the audio.

Changing the sample rate will produce a momentary popping noise.

Because of this, it is recommended that you turn the Main and Phones

volumes down on your AudioBox prior to changing the sample rate.

On Windows systems, the sample rate is set from

inside your host audio application.

Performance (OS X only) Changes VSL’s Input Monitoring Buffer Size .

VSL oﬀers three Performance modes for input monitoring: Fastest,

Normal, and Safe. These modes allow you to adjust the VSL’s buﬀer to

either lower the input latency or increase it depending on your

computer’s speed.

• Fastest: Sets VSL’s input buﬀer to 1 millisecond.

• Normal: Sets VSL’s input buﬀer to 2 milliseconds.

• Safe: Sets VSL’s input buﬀer to 4 milliseconds.

For most machines, Normal mode will provide the

excellent stability with nominal latency.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 83 84

Comments to this Manuals

No comments

Presonus AudioBox 44VSL User Manual Page 22

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Presonus AudioBox 44VSL