Presonus AudioBox 44VSL User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
27
Owners Manual
OverviewHookupConnecting
to a
Computer
TutorialsTechnical
Information
Troubleshooting
and Warranty
Software: Virtual StudioLive
SL Remote,
and Studio One Artist
Software: Virtual StudioLive and Studio One Artist 4
Software: Virtual StudioLive
and Studio One Artist
Virtual Studio Live 4.1
Mid EQ Frequency Control Sets the Center Frequency of the Mid EQ.
The center frequency is the middle of the passband (the mean) between
the lower and upper cutoff frequencies that define the limits of the band.
You can adjust the center frequency from 380 Hz to 5 kHz.
Mid EQ Gain Control Sets the Gain Attenuation or Boost of the Center Frequency
of the Mid Band.
This control sets the Gain cut or boost at the center frequency of the
Mid band. The level of the center frequency can be set between
-15 and +15 dB.
Mid Hi Q Button Enables a Narrow Bandwidth for the Mid Band EQ on the Selected
Input or Bus.
Q is the ratio of the EQ band’s center frequency to its bandwidth.
With a constant center frequency, higher Q values indicate a narrower
bandwidth, so Q is often equated with bandwidth. By default,
the Q is set to a value of 0.55. When the Hi Q button is engaged,
the Q setting will be increased to 2.0, thus narrowing the bandwidth to
provide more precise control.
High EQ On/Off Button Activates Control for the High EQ for the Selected Input or Bus.
This button activates control of the High band for the selected channel or
bus. The button will illuminate to indicate control is active.
The High EQ band is available for all input and output buses.
High EQ Frequency Control Sets the Center Frequency of the High EQ.
The center frequency is the middle of the passband (the mean) between
the lower and upper cutoff frequencies that define the limits of the band.
You can adjust the center frequency from 1.4 to 18 kHz.
High EQ Gain Control Sets the Gain Attenuation or Boost at the Center Frequency of the High
EQ Band.
This control sets the gain cut or boost at the center frequency of the High
EQ band. The level of the center frequency can be set between -15 and
+15 dB.
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 83 84

Comments to this Manuals

No comments